Chat with us, powered by LiveChat

Types Of Incubator In Laboratory

Home/Types Of Incubator In Laboratory

Project Description

Types Of Incubator In Laboratory

  • CO2 (carbon dioxide) incubators, microbiological incubators, artificial climate incubator, light incubators.

  • Laboratory incubators factory price, customize, OEM, factory visit contact info@toption-china.com

Send Inquiry

Types Of Incubator In Laboratory

HH-CP series laboratory incubator is TOPTION new development carbon dioxide incubator, this series has water-jacket type and gas-jacket type two types, each type has 80L, 160L capacity.

CO2 (carbon dioxide) incubators are widely used in immunology, oncology, genetics and biology gene engineering research, widely applied in medicine, agriculture science, medicine and other scientific research and production department.

  • Technical parameters CO2 (carbon dioxide) incubators

These data is measured by 0.1℃ precision mercurial thermometer and RD-7AG type COanalyzer, measure condition environment temperature is 25℃, relative humidity ≤ 85%.

                    Model

HH-CP-T

HH-CP-01

HH-CP-TW

HH-CP-01W

Capacity

80L

160L

80L

160L

Supply voltage

220V 50HZ

Heating method

Gas jacketed type

Water jacketed type

Temp. Control range

RT+550℃

Temp. control accuracy

±0.3℃

Temp resolution ratio

0.1℃

Constant temp. fluctuaion

±0.3℃

Error alarm

1.0℃

CO2 Control range

020%

CO2 error

0.3%

Humidification method

natural evaporation

Input power

520W

770W

730W

1000W

Liner dimension

500*400*400

500*500*650

400*400*500

500*500*650

Outside dimension

760*530*560

770*630*810

710*540*720

805*640*870

Loading shelfstandard

2pcs

  • Normal operating environment of CO2 laboratory incubators

1. Environment temp.:5~30℃.

2. Environment relative humidity ≤ 90%.

3. Atmospheric pressure:86~106kpa.

4. Around without strong vibration and corrosive gas.

5. Should avoid direct sunlight or other the influence of cold and heat source.

  • Main features of mini lab incubator CO2 incubators

1.CO2 incubator parts: incubator box, liner(working chamber),temperature control apparatus, CO2 concentration control apparatus, gas circulating device.Vertical frame structure, plastic spraying appearance, bright colors and beautiful.

2. Control device and all kinds of display are installed in the CO2 tank top, easy to operate. Water jacket type tank is made of stainless steel water jacketed structure, in order to improve the corrosion resistance and thermal insulation performance.

3. Gas jacketed type heating adopts the electrothermal heating bundle, fast heating and good uniformity. CO2 incubator use double door structure, outside door use magnetism door gasket, guarantee CO2 incubator sealing is well. Inner door use glass door, convenient to observe.

4. In order to avoid glass door moisture condensation, outside door has heating function, its temperature is higher than the temperature in working chamber, this function is already set well before delivery.

5. At the same time, behind glass door has door control switch installed on box, when the door opens, can automatically cut off the heating, air and gas circulation circuit, can prevent the invasion of external pollution, avoid overshoot temperature and CO2 concentration.

Get laboratory incubators pdf, laboratory incubator price list welcome contact info@toption-china.com 24h/7days online service.

Microbiological Incubators laboratory incubators

TOPTION SPX intelligent biochemical incubator is composed of box body, heater, refrigerator, circulating fan, temperature sensor, intelligent temperature controller and over-temperature protector, etc.

Microbiological incubators can stabilize the temperature in the box at a certain value according to the user’s needs.

So it’s widely used for culture of microorganisms, feeding of insects and small animals, germination of plants, storage of biological products, and storage of blood & chemicals.

  • Technical parameters of laboratory incubators microbiology
Temp. control range050Temp. fluctuationHeating ±0.3, Cooling ±1.0.
Temp. deviation±1.0Temp. inhomogeneity\
Heating time0~40 ≤80minCooling time40~0  ≤80min
Delay protection time3minRefrigerating fluidR134a (fluoride-free)
Noise70dbPower source220±22V,50±0.5HZ
Working methodContinuous working (The compressor is intermittent refrigeration).
Working environmentTemp. 030, humidity 90%RH, non-corrosive gas.
  • Model selection of laboratory incubators

Model

Capacity

Outside dimension (mm)

Working chamber dimension (mm)

Temp. range

SPX80

80L

590*590*1100

500*500*400

0-50

SPX100

100L

590*590*1100

500*500*450

0-50

SPX150

150L

590*590*1340

500*500*600

0-50

SPX180

180L

590*590*1340

540*540*650

0-50

SPX250

250L

610*610*1650

510*510*1080

0-50

SPX280

280L

590*590*1640

540*540*960

0-50

SPX350

350L

600*600*1890

500*500*1380

0-50

SPX380

380L

590*590*1890

540*540*1210

0-50

SPX500

450L

680*680*1890

620*620*1150

0-50

SPX600

     600L

1200*590*1650

 1140*540*960

0-50

SPX800

     800L

1200*590*1890

1140*540*1210

0-50

SPX1000

1000L

1300*680*1890

1240*620*1210

0-50

SPX1200

1200L

1860*680*1890

1800*620*1210

0-50

SPX1500

1500L

1960*680*1890

1900*620*1210

0-50

SPX2000

2000L

2485*765*1890

2345*705*1145

0-50

Light Incubators Laboratory 

PGX intelligent light incubators is a biological culture test equipment controlled by computer, which is controlled by 1-2 time periods, and controlled by the automatic switch program of light , the temperature is constant day & night.

TOPTION light incubators can be used for seed germination, seedling raising, plant tissue culture and cultivation, microbial culture, raising insects and small animals, drug antioxidant test and environmental test,etc.

  • Technical parameters of light incubators:
Temp. control range050 (National   industry standard 10~40 )Temp.fluctuation±1.0
Temp.departure±1.5Temp. inhomogeneity≤1.5
Max number of programmable sections for temp. & humidity

1) Two sections (i.e. 01 by day   and 02 by night).

2) 30 sections (could extend to 99 sections,PGX model).

Light grade0~4 grade (A=0~3 grade, B,C,D=0~4 grade).
Communication interfaceRS232Heating time10 to 40 need 60min.
Cooling time40 to 10 need 60min.Heating power300700W
Compressor power135W400WCompressor delayed protection timeAbout 3min.
Refrigerating fluidR12 or R134a (fluoride-free)Power source

 

220±22V50±0.5HZ
Working environment0~40 temp. humidity below 85% RH, no corrosive gas.Working methodContinuous operation (compressor intermittent operation).
  • Model selection of labroatory incubators

Model

Capacity

Outside dimension (mm)

Working chamber dimension (mm)

illuminance

PGX-150A

150L

590*590*1500

520*520*600

0-3000LX

PGX-150B

0-15000LX

PGX-150C

0-22000LX

PGX-150D

0-30000LX

5 customer service tips from LiveChat