Nutsche Filter Dryer
Filter, washing and drying reactor, three-in-one filter.
Mainly used for crystallization liquid filtration, washing, drying process.
Crystallization liquid 50-100L.
Nutsche Filter Dryer
In order to meet the confined production process, filter washing and drying reactor, three-in-one filter has been developed. TOPTION this production system can realize half automatic or complete automatic operation control.
Nutsche Filter Dryer main working steps
Open the feeding valve to feed in the tank, paddle should be in the upper position when feeding, if necessary, can be lowered stirring paddle for low speed stirring, so that the material is evenly distributed. When the material reaches the specified process stop feeding, close the feed valve.
Washing fluid at 0.2 ~ 0.3MPa pressure by the rotating nozzle cleaning, and stirring paddle has been suspended high.
After washing, upper the stirrer to related position, stop stirring, the liquid will be discharged from bottom. Then repeat the filtering steps until you get perfect material.
- Open hot water valve, then balance valve, next vacuum valve.
- Please open the balance valve in advance if upper vacuum down drying condition, to ensure pressure balance. to Concentration of chloride ions in the heating and cooling water should be strictly controlled, to avoid chloride ions on the jacket and the tank corrosion. Please use of chloride-free water.
- Open the jacket water inlet valve slowly, and open slightly for water outlet valve. Fully open them when outlet and inlet has temperature gap less than 20℃ to avoid cavitation vibration.
5. Material discharge
Sampling analysis before discharge, if ok, then discharge them.
Main technical parameters of laboratory nutsche filter:
1um-2mm is optional
Tank design pressure
Jacket operation pressure
Tank operation temp
Jacket operation temp
Tank working medium
Jacket working medium
|Cooling water, hot water, hot oil, steam|
Tank(jacket), bottom (jacket)
Manual side discharge
Pressure tank design standard
Flange design standard
Clamp design standard
|Discharge valve port size|
Discharge port size
Mixing drive apparatus
Stirrer motor power
Max rotation speed
Min rotation speed
|main configuration list|
O shape seal
Coaded with PTFE
1:100 Reduction ratio
|Mechanical seal, wetted material 316L, + bellows|
|Fixed type, 1 pc, SS316L|
More nutsche filter customize, want to know detail information of nutsche filter dryer, welcome contact email@example.com 24h/7days online service.
Agitated Nutsche Filter Dryer
Nutsche filter dryer is mainly used for crystallization liquid filtration, washing, drying process.
It includes: feeding, beating, filtering, washing, drying, discharging, on-line inspection (optional), etc key steps to prepare for the cleanroom of next mixing process.
TOTPION this Nutsche Filter Dryer also has CIP, SIP functions.
Structural materials of agitated nutsche filter dryer:
Below for Stainless steel equipment and surface treatment:
Tank inner surface
Tank outside insulation
Discharge valve which contact to material
Spindle metal bellows
CIP tube (inner side):
Multi-layer sintered net
Tank inside tubes
More detail information of nutsche filter dryer welcome contact firstname.lastname@example.org 24h/7days online service.