10L, 20L, 30L, 50L, rotary evaporator customize.
Anti-corrosion & Wearable sealing system.
Large LCD display temp. & rotating speed.
CE certification reliable, OEM customization support.
New Design Rotary Evaporator
10L 20L Industrial Rotavapor
30L 50L Rota Evaporator
Rotary evaporator is mainly used in pharmaceutical, chemistry and bio-pharmaceuticals industries, for concentration, crystallization, drying, separation and solvent recovery.
The principle of rotary vacuum evaporator is under the vacuum condition, constant temperature heating, evaporation bottle be rotary by constant speed, material forming a large area film at the wall of bottle, efficient evaporation.
Solvent vapors through the efficient glass condenser cooling, recycling in the collection bottle, improve the efficiency of evaporation.
Especially suitable for the biological products concentration and purification which is easy to decompose deformation under high temperature.
| 1. Three-channel Bottle | 2. Three-channel Bottle Hold-down Nut | 3. Three-channel Bottle Hold-down Nut Retaining Ring | 4. Flange Sealing Retaining Ring |
| 5. Glass Rotation Axis | 6. O-ring | 7. Coupler | 8. Teflon Sealing Ring |
| 9. Rotating Bottle Hold-down Nut Retaining Ring | 10. Rotating Bottle Clamp Nut | 11. Glass Rotating Bottle | 12. Condenser Pipe Clamp |
| 13. Cross Clamp | 14. Top Upright Tube | 15. Down Upright Tube | 16. Pedestal |
| 17. Vacuum Meter | 18. Vacuum Meter Stand | 19. Motor Box | 20. Water Bath |
| 21. Air Exhaust Bend | 22. 60# Connecting Flange | 23. 60# Flange Retaining Ring | 24. 60# Flange Seal Washer |
| 25. Main Glass Condenser Pipe | 26. Assistant Glass Condenser Pipe | 27. Assistant Glass Condenser Pipe Bracket | 28. 50# Connecting Flange |
| 29. 50# Flange Retaining Ring | 30. 50# Flange Seal Washer | 31. Automatic Switch Valve | 32. Air Outlet Valve |
| 33. Recovery Bottle | 34. Recovery Bottle Tray | 35. Discharging Valve | 36. Charging Valve |
Your benefits of TOPTION new design rotary evaporator 10L, 20L, 30L,50L:
1. Large LCD display temp. & rotating speed.
2. Built-in automatic check valve, for better vacuum degree and good continuously operation.
3. Gas guide flask unique PTFE combination valve, can control air flow and liquid flow based on your actual needs, material charging & discharging could be finished during rotary evaporator working, you don’t need to stop rotavapor, make your research more efficient, and achieve more better organic corrosion resistance.
4. Bottom has wheel for more convenient movement.
5. Easy installation which could save more than a half of your work.
6. Automatic lifting, use foreign advanced drive system, reasonable structure design, be durable and more practical.
7. All sealing adopt PTFE, FFKM material, after special processing, enhance sealing performance, corrosion resistance and abrasive resistance.
8. Control system is integration, use imported advanced frequency converting control system, for more precise control, guarantee rotary evaporator’s performance be accurate, easier operating.
9. Oil bath use stainless steel plate one time stamping molding, vertical automatic lifting.
10. Beautiful appearance, easy and convenient rotary evaporator cleaning.
11. Explosion proof system of rotary evaporator.
Rotary evaporator OEM customization, contact info@toption-china.com 24h/7days online service.
Continuous receiving technology, solvent discharge no longer need to stop evaporation process, to release and re-pump system vacuum. The technology allows real continuous work without vacuum wave, which obviously increases productivity simplifies system receiving structure and improves sealing performance.
System vacuum does not drop during discharging shift. Sample received keeps consistent quality.
Easier installation and maintenance in compact tandem type structure.
Leakage points reduced by 50%. Ultimate system vacuum is improved further in receiving structure.
Technical parameters of TOPTION industry rotary evaporator:
Relevant Model | RE-5210A RE-5210AEx RE-5210ADEx | RE-5220A RE-5220AEx RE-5220ADEx |
Evaporating Flask(L) | 10L/F95 | 20L/F125 |
Receiving Flask(L) | 5L, | 10L + 3L, |
Condensing Surface(㎡） | 0.57 | 1 |
Rotation Speed (rpm) | 3-110 | 3-110 |
Max Evaporating Speed (Ethyl Alcohol) | 3L/H | 5L/H |
Lifting Type | Automatic lifting | |
Reachable Vacuum Rate | 0.098Mpa (SHB-B95 Vacuum Pump) | |
Bath Power (kw) | 3 | 3 |
Staic Temp. Control Range & Wave (℃） | RT-99(170) ±0.2 | RT-99(170) ±0.2 |
Bath Size. Capacity Material | ￠35*25H, 22L, SUS304 | ￠45*27H, 40L, SUS304 |
Power | 220V, 50/60Hz | 220V, 50/60Hz |
Dimensions (mm) | 950*500*1800H | 1100*600*2100H |
* Note: Max evaporating speed is affected by operation setting and the performances and matching levels of supporting equipment.
“A”-Automatic lifting, “AD”-Automatic Lifting 170℃ Oil Bath, “AEX”-Automatic Lifting Explosion Protection.
Safety features of rotary evaporator:
Relevant Model | RE-5210A RE-5210ADEx | RE-5220A RE-5220ADEx |
Over-current Protection | Have | |
No-spark Electronic Control | Have | |
Ex-proof Upgrade | Ex-proof modification on motor, rotation & heating control, lower heating power density, equip dry heat and overheat cut-off protector | |
Functional configurations of TOPTION large rotary evaporator:
Relevant Model | RE-5210A RE-5210ADEx | RE-5220A RE-5220ADEx |
Charging Valve | Glass | Glass |
PTFE Discharge Valve | PTFE | PTFE |
PTFE Rotary Seal Assembly | Have | |
Overall Flange Joints | Have | |
Taper Joint PTFE Sleeve | Have | |
Frequency Conversion Speed Control | Have | |
Vacuum Meter | Have | |
Throttle Valve For Vacuum | Have | |
Thermometer Neck For Vapor | Optional | |
Continuous Receiving | Have | |
Digital Display | Bath temperature, Rotation speed | |
Evaporating Flask Unload Handler | Optional | |
Ex-proof Motor | Optional | |
Cold Trap Protection System | Optional | |
Bumping Tube | Have | |
Optional Evaporating Flask (baffles available at request) | 5L | 5L, 10L |
Technical parameters of rotary evaporation equipment:
Relevant Model | RE-5230A RE-5230ADEx | RE-5250A RE-5250ADEx |
Evaporating Flask(L) | 30L/F125 | 50L/F125 |
Receiving Flask(L) | 10L + 10L, | 20L + 10L, |
Condensing Surface(㎡） | 1.3 | 1.5 |
Rotation Speed (rpm) | 3-110 | 3-110 |
Max Evaporating Speed (Ethyl Alcohol) | 6L/H | 8L/H |
Lifting Type | Automatic lifting | |
Reachable Vacuum Rate | 0.098Mpa (SHB-B95 Vacuum Pump) | |
Bath Power (kw) | 6 | 6 |
Staic Temp. Control Range & Wave (℃） | RT-99(170) ±0.2 | RT-99(170) ±0.2 |
Bath Size. Capacity Material | ￠45*27H, 40L, SUS304 | ￠55*32H, 70L, SUS304 |
Power | 220V, 50/60 Hz | 220V,50/60Hz |
Dimensions (mm) | 1300*800*1900H | 1300*800*2300H |
* Note: Max evaporating speed is affected by operation setting and the performances and matching levels of supporting equipment.
“A”-Automatic lifting, “AD”-Automatic Lifting 170℃ Oil Bath, “AEX”-Automatic Lifting Explosion Protection.
Safety features of large rotary evaporator:
Relevant Model | RE-5230A RE-5230ADEx | RE-5250A RE-5250ADEx |
Over-current Protection | Have | |
No-spark Electronic Control | Have | |
Ex-proof Upgrade | Ex-proof modification on motor, rotation & heating control, lower heating power density, equip dry heat and overheat cut-off protector | |
Functional configurations of TOPTION rotary vacuum evaporation equipment:
Relevant Model | RE-5230A RE-5230ADEx | RE-5250A RE-5250ADEx |
Charging Valve | Glass | Glass |
PTFE Discharge Valve | PTFE | PTFE |
PTFE Rotary Seal Assembly | Have | |
Overall Flange Joints | Have | |
Taper Joint PTFE Sleeve | Have | |
Frequency Conversion Speed Control | Have | |
Vacuum Meter | Have | |
Throttle Valve For Vacuum | Have | |
Thermometer Neck For Vapor | Optional | |
Continuous Receiving | Have | |
Digital Display | Bath temperature, Rotation speed | |
Evaporating Flask Unload Handler | Optional | |
Ex-proof Motor | Optional | |
Cold Trap Protection System | Optional | |
Bumping Tube | Have | |
Optional Evaporating Flask (baffles available at request) | 5L,10L,20L | 10L,20L,30L |
0086-29-88763980
0086-18191873629