5 inch, 7 inch, 8 inch, 12 inch, 14 inch, 20 inch, 32 inch optional.
Technical support to new starter / cbd oil distillation process improvement.
Fast delivery, safe shipping, overseas installation / training service is available.
Two stage 8 inch
8 inch single stage
5 inch hotsale lab type
The first-stage heavy discharge pipeline is connected to the second-stage feed, and the second-stage heavy discharge pipeline is connected to the third-stage feed.
The first stage and the second stage remove light terpenes in two consecutive stages, collect terpenes and essential oils with different molecular weights respectively, and completely separate the terpenes in the extracted oil. The third-level molecular distillation of cannabinoids achieves the enrichment of cannabinoids.
Advantages of TOPTION stainless steel wiped film distillation equipment
MDS-30CE 8 inch single stage wiped film molecular distillation
Hotsale molecular distillation equipment 8 inch for laboratory research, support muti-stages customization, could combined with wiped film evaporator – wiped film evaporator first stage, molecular distillation second stage | third stage, more convenient operation and also save cost.
Technical parameters of MDS-30CE molecular distillation equipment
| Model | MDS-30C wiped film molecular distillation |
| Material tank | 30L jacketed tank |
| 2 sight glass at top, with insulated ball valve. | |
| Material charging | Gear pump |
| Flow 5L～30L/H | |
| 200W motor, electronic speed regulation. | |
| Evaporator | Evaporation area 0.3㎡ |
| Film forming way: scraper (roller is optional) | |
| Material：316L | |
| Mechanical seal (Magnetic seal is optional) | |
| Film forming motor：550W, mechanical constantly variable transmission，200～1000rpm/min | |
| Cold trap | 1. 1㎡chiller cooling cold trap |
| 2. 3L liquid nitrogen cold trap | |
| 3. Dual-purpose（chiller & liquid nitrogen cold trap dual purpose）. | |
| Choose 1 in above 3 types | |
| Heavier component discharge | Gear pump |
| Flow 5L～30L/H | |
| 200W motor, electronic speed regulation. | |
| Lighter component discharge | Gear pump |
| Flow 5L～30L/H | |
| 200W motor, electronic speed regulation. | |
| Material pipeline | Jacketed insulation |
| Shelf & assemble | 304 stainless steel pipe |
MDS-10CE 5inch laboratory type short path molecular distillation
Technical parameters of MDS-10CE wiped film molecular distillation equipment
| Model | MDS-10C molecular distillation equipment |
| Material tank | Upgrade 15L jacketed stainless steel tank |
| 2 sight glass at top, with insulated ball valve. | |
| Material charging | Gear pump |
| Flow 3L～15L/H | |
| 200W motor, electronic speed regulation. | |
| Evaporator | Evaporation area 0.1㎡ |
| Film forming way: scraper (roller is optional) | |
| Material：316L | |
| Mechanical seal (Magnetic seal is optional) | |
| Film forming motor：370W, mechanical constantly variable transmission，200～1000rpm/min | |
| Cold trap | 1. 0.4㎡chiller cooling cold trap |
| 2. 3L liquid nitrogen cold trap | |
| 3. Dual-purpose（chiller & liquid nitrogen cold trap dual purpose） | |
| Choose 1 in above 3 types | |
| Heavier component discharge | Gear pump |
| Flow 3L～15L/H | |
| 200W motor, electronic speed regulation. | |
| Lighter component discharge | Gear pump |
| Flow 3L～15L/H | |
| 200W motor, electronic speed regulation. | |
| Material pipeline | Jacketed insulation |
| Shelf & assemble | 304 stainless steel pipe |
Related products of cbd oil distillation process
0086-29-88763980
0086-18191873629
