200L Nutsche Filter Dryers TOPTION Nutsche Filtration Drying
Detail Information Place of Origin China Brand Name TOPTION Agitation: Available Cake Drying: Available Cake Washing: Available Cleaning Method: CIP (Clean-in-Place) Control System: PLC (Programmable Logic Controller) Discharge…
Product Information
Detail Information
| Place of Origin | China |
|---|---|
| Brand Name | TOPTION |
| Agitation: | Available |
| Cake Drying: | Available |
| Cake Washing: | Available |
| Cleaning Method: | CIP (Clean-in-Place) |
| Control System: | PLC (Programmable Logic Controller) |
| Discharge Method: | Bottom Discharge |
| Filtration Method: | Vacuum Or Pressure Filtration |
| Material: | Stainless Steel |
| Type: | Solid-Liquid Separation Equipment |
| Price: | Negotiable |
| Delivery Time: | 15-20 workdays |
| Payment Terms: | LC, T/T, PayPal, Western Union, Small-amount payment, |
| Highlight: | 200l nutsche filter dryers , toption nutsche filtration , nutsche filter dryers toption |
-
-
200L Nutsche filter dryers
TOPTION brand 200L nutsche filter dryers gather “Filtration, Washing, Drying” function in one body, which is a new premium solid-liquid separation technology, can make the material finish filtering, washing and drying process in an airtight container equipment, utmost to improve the utilization rate of the nutsche filter dryers.
Technical parameters of 200L nutsche filter dryers
Name
DN600 Nutsche filter dryers
Item No
RFCD-DN600-316L
Container Diameter
600mm
thickness
6mm
Filter Area
0.28m2
Volume
0.2m3(200liter)
Design Pressure
0.4Mpa for container
0.5Mpa for jacket
Design Temperature
130℃ for container
150℃ for jacket
Material
material-contacting parts:SS31603; Others: SS30408
Filter type
316L sintering net
Micron size
10 micron
Main Shaft seal way
Packing seal way
Material
PTFE packing
Agitation blade
S-shaped asymmetric paddle
Shaft lift height
100mm
Mixing stroke
200mm
Stirring motor power
1.5kw EX Motor
Explosion proof grade
dⅡBT4
Stirring speed
0~20r/min
Stirring lift type
Hydraulic Cylinder Drive
Chassis lift type
Hydraulic Cylinder Drive
Discharge port switch form
Hydraulic Cylinder and Hydraulic Motor Drive
Hydraulic motor power
1.5kw
Voltage
3 phase 380V 60HZ
Why choose nutsche filter dryers ?
1. In one same container finish filtering, washing and drying whole process, continuous operation.
2. Operate under pressure or vacuum condition, realize the solid-liquid separation.
3. During filtering process, the filter cake uniform distribution, solid-liquid separation effect is good.
4. Hydraulic pressure control the rise & fall of the mixing system, has uttermost increase the solid materials space during filteration process.
5. The rise & fall and stirring of mixing blade, make the cleaning fluid and filter cake intensive mixing during washing process , guarantee the filter cake full washing.
6. Greatly shorten time during drying process, improve efficiency.
7. Various control of liquid outlet valve, automatic material discharging of solid discharging system, reduce the labor intensity, save cost and more efficient.
8. Can washing online, sterilization online, all operation process can be done under inert gas protection, safe and reliable.
9. Nutsche filter baseplate is removable, help the equipment realize thoroughly cleaning, applicable to the production of sterile bulk drug, full compliance with GMP and FDA production requirements.
Nutsche filter dryers factory show, CE certification, ISO approved, quality is our culture, welcome contact info@toption-china.com for professional customize or factory visit.
Lab type nutsche filter
Nutsche Filter Dryer
In order to meet the confined production process, filter washing and drying reactor, three-in-one filter has been developed. TOPTION this production system can realize half automatic or complete automatic operation control.
Nutsche Filter Dryer main working steps
1. Feeding
Open the feeding valve to feed in the tank, paddle should be in the upper position when feeding, if necessary, can be lowered stirring paddle for low speed stirring, so that the material is evenly distributed. When the material reaches the specified process stop feeding, close the feed valve.
2. Washing
Washing fluid at 0.2 ~ 0.3MPa pressure by the rotating nozzle cleaning, and stirring paddle has been suspended high.
3. Filter
After washing, upper the stirrer to related position, stop stirring, the liquid will be discharged from bottom. Then repeat the filtering steps until you get perfect material.
4. Drying
- Open hot water valve, then balance valve, next vacuum valve.
- Please open the balance valve in advance if upper vacuum down drying condition, to ensure pressure balance. to Concentration of chloride ions in the heating and cooling water should be strictly controlled, to avoid chloride ions on the jacket and the tank corrosion. Please use of chloride-free water.
- Open the jacket water inlet valve slowly, and open slightly for water outlet valve. Fully open them when outlet and inlet has temperature gap less than 20℃ to avoid cavitation vibration.
5. Material discharge
Sampling analysis before discharge, if ok, then discharge them.

- Nutsche filter dryer
Main technical parameters of laboratory nutsche filter:
No Details Remark 1
description Filter area
0.07m2
filtering accuracy
5μm
Standard 5um
1um-2mm is optional
Inner diameter
300mm
volume
0.02m3 Empty weight
600kg Total height
1700mm+150mm Tank design pressure
-0.1~0.4MPa
Jacket operation pressure
0.5MPa
Tank operation temp
0~160℃
Jacket operation temp
0~160℃
Tank working medium
Chemical materials
Jacket working medium
Cooling water, hot water, hot oil, steam Heating position
Tank(jacket), bottom (jacket)
Discharge method
Manual side discharge
Pressure tank design standard
GB150.1~150.4-2011
Flange design standard
HG20592-2009
Clamp design standard
ISO2852
Discharge valve port size 100
Discharge port size
50
2
Mixing drive apparatus
Stirrer stroke
100mm Stirrer motor power
1.1kw voltage
220 V
Rated frequency
50Hz
phase
2
Max rotation speed
15rpm
Min rotation speed
0rpm
3
main configuration list O shape seal
Coaded with PTFE
Gear motor
Eugene
Reducer
1:100 Reduction ratio
Machinery Seal
Mechanical seal, wetted material 316L, + bellows Spray ball
Fixed type, 1 pc, SS316L More nutsche filter customize, want to know detail information of nutsche filter dryer, welcome contact info@toption-china.com 24h/7days online service.
-





